Hear from Our Customers
Your marine refrigeration system shouldn’t be a gamble every time you head out. When it’s working right, you don’t think about it—your food stays fresh, drinks stay cold, and you focus on what matters.
Most boat owners deal with systems that drain batteries, fail during peak season, or never quite cool properly. You end up with expensive groceries going bad and trips cut short.
We handle marine refrigeration differently. Your system gets properly sized for your vessel, installed to handle marine conditions, and maintained to prevent those mid-season breakdowns that ruin weekends.
We’ve been solving marine refrigeration challenges across East Hills and Long Island for over four decades. We’re not general HVAC contractors trying to figure out boats—marine cooling is what we do.
East Hills boat owners know the unique challenges here. Salt air, humidity, and the demanding marine environment require specialized knowledge. We’ve seen every cooling problem these waters can throw at a system.
Our team brings that depth of experience to every job, whether you’re dealing with a simple repair or need a complete custom cooling solution for your vessel.
We start with a free estimate where we assess your boat’s specific cooling needs, power requirements, and space constraints. No generic solutions—every vessel is different.
Installation happens on your schedule with minimal disruption to your boat. We handle everything from proper mounting and vibration isolation to electrical connections and system testing.
After installation, we walk you through operation and maintenance basics. You’ll know exactly how your system works and what to watch for. Plus, our 24/7 support means you’re never stuck with a problem you can’t solve.
Ready to get started?
We handle every aspect of marine refrigeration and air conditioning for East Hills boat owners. That includes new installations, system repairs, preventive maintenance, and emergency service calls.
East Hills sits in prime boating territory with access to Long Island Sound and beyond. Boats here see serious use, and cooling systems work hard in our humid summers. We understand these local conditions and size systems accordingly.
Our service includes energy-efficient solutions that won’t drain your batteries, proper seawater cooling integration, and regular maintenance to prevent marine growth issues that plague systems in our waters. When other companies have 10-week backlogs, we’re available.
Power consumption depends on your system size, insulation quality, and how often you open compartments. A properly sized marine refrigerator typically uses 3-6 amps per hour when running, but cycles on and off based on temperature.
Energy-efficient systems with good insulation might run 8-12 hours daily in summer conditions. Poor insulation or oversized systems can double that consumption. We calculate your specific power needs during the estimate process.
The key is right-sizing your system and ensuring proper insulation. An undersized unit runs constantly trying to keep up. An oversized unit cycles too frequently and wastes power on startup.
Marine refrigeration systems are built to handle constant motion, vibration, and corrosive salt air that would destroy regular household units. The compressors are specially mounted, and all components resist corrosion.
Marine units also use different cooling methods. Many use seawater for heat rejection instead of air cooling, which is more efficient in marine environments. They’re designed to operate at angles and handle the electrical variations common on boats.
Regular refrigerators aren’t built for these conditions. They’ll fail quickly due to vibration damage, corrosion, or inadequate mounting systems that can’t handle a boat’s movement.
Marine refrigeration systems need attention every 3-4 months during boating season, with more frequent checks if you’re in the water full-time. Seawater strainers should be inspected every few weeks, especially in summer when marine growth is active.
Return air filters need monthly inspection and cleaning. Condenser coils require regular cleaning to maintain efficiency. We also check refrigerant levels, electrical connections, and mounting hardware during service calls.
Preventive maintenance prevents most emergency breakdowns. It’s much cheaper to maintain your system properly than deal with spoiled food and emergency repairs during peak season.
We install marine refrigeration systems on everything from small day boats to large yachts. The approach changes based on your vessel size, power availability, and space constraints.
Smaller boats often use 12V DC systems that run directly off your battery bank. Larger vessels might use AC systems or chilled water systems that provide cooling to multiple zones. We design the solution around your specific needs.
Space is usually the biggest constraint on smaller boats. We specialize in compact, efficient systems that maximize cooling capacity while minimizing space requirements and power consumption.
We provide 24/7 consulting to help diagnose problems remotely and get you back running when possible. Many issues can be resolved with phone guidance if you have basic tools onboard.
For problems that require parts or hands-on repair, we coordinate with marine service networks to get you help at your location. Our goal is keeping your trip on track, not waiting until you return to port.
We also stock common replacement parts and can often arrange same-day delivery to marinas in the East Hills area. Emergency service is part of what sets us apart from companies with week-long backlogs.
Regular seawater strainer cleaning is your first defense against marine growth clogging your system. Check strainers every 2-3 weeks during active boating season, more often in warm water where growth accelerates.
We recommend zinc anodes in your seawater system to reduce corrosion and growth buildup. Some boat owners add growth inhibitors to their seawater systems, though this requires careful application to avoid environmental issues.
Proper system design also helps. Adequate water flow rates and appropriately sized through-hulls reduce the likelihood of blockages. During our installations, we size everything to handle typical growth conditions in Long Island waters.
Local Resources
Useful Links
