Hear from Our Customers
Your marine refrigeration system works efficiently without draining your boat’s power. You get consistent cooling performance even during Long Island’s hottest summer days. Food stays fresh during extended trips, and your beverages stay cold when you’re entertaining guests.
When your system runs properly, you stop worrying about compressor failures in the middle of a weekend cruise. You avoid the frustration of finding warm beer and spoiled provisions after a day on the water. Your boat becomes the reliable escape you invested in, not another source of mechanical headaches.
The right marine refrigeration setup means your galley functions like your home kitchen. You can provision for longer trips, store fresh catch properly, and enjoy cold drinks without constantly monitoring battery levels or system performance.
We’ve been solving marine refrigeration problems in Shoreham and throughout Long Island for over 40 years. We understand how salt air, temperature swings, and marine environments affect cooling systems differently than land-based equipment.
Our technicians know the specific challenges boat owners face in this area. Long Island’s coastal climate demands systems that handle both summer heat and winter storage conditions. We’ve installed and serviced refrigeration systems on everything from weekend fishing boats to luxury yachts.
You get technicians who understand marine electrical systems, proper ventilation requirements, and how to size equipment for your specific vessel and usage patterns. We’re not learning on your boat—we’ve solved these problems thousands of times before.
Your marine refrigeration project starts with a thorough assessment of your boat’s current setup, power systems, and cooling needs. We measure available space, evaluate your electrical capacity, and discuss how you actually use your vessel. This determines the right equipment size and configuration.
Installation begins with proper mounting and securing of components to handle marine conditions. The refrigeration system gets connected to your boat’s electrical system with appropriate safety shutoffs and monitoring. All connections are weatherproofed and protected against vibration and corrosion.
Testing includes full system operation under various conditions, temperature calibration, and power consumption verification. You receive training on daily operation, basic maintenance tasks, and warning signs that indicate potential problems. Our 24/7 service number goes in your phone for future support needs.
Ready to get started?
Your marine refrigeration service includes proper system sizing based on your boat’s actual storage needs and usage patterns. Equipment gets configured for Shoreham’s specific marine environment, including proper insulation and components rated for Long Island’s coastal conditions.
Installation work meets marine electrical codes and includes weatherproofing that protects against salt air corrosion. You receive energy-efficient systems that minimize battery drain while maintaining consistent cooling performance. Custom solutions handle unique boat layouts and special requirements that standard equipment can’t address.
Emergency service means someone knowledgeable answers the phone 24/7 and dispatches experienced technicians who carry the right parts. Regular maintenance programs keep your system running efficiently and catch potential problems before they cause failures during your boating season.
Modern marine refrigeration systems typically consume between 3-8 amps per hour when running, depending on system size and efficiency. A well-designed system cycles on and off rather than running continuously, so actual power consumption averages much lower than peak draw.
Energy-efficient compressors and proper insulation significantly reduce power requirements. Systems with variable speed compressors adjust power consumption based on cooling demand, using less power during cooler weather or lighter loads.
Your boat’s alternator and battery capacity determine how long you can run refrigeration without shore power or engine operation. Most properly sized systems allow 12-24 hours of operation on battery power alone, depending on ambient temperature and usage patterns.
Marine refrigerator sizing depends on your crew size, trip length, and available space rather than just physical dimensions. A weekend fishing boat typically needs 2-4 cubic feet of refrigeration space, while cruising boats require 6-12 cubic feet or more.
Calculate approximately 1.5-2 cubic feet per person for weekend trips, and 3-4 cubic feet per person for extended cruising. Consider separate freezer space if you plan to store frozen provisions or preserve fish catches.
Available power, space constraints, and ventilation requirements also affect sizing decisions. Larger systems need more electrical capacity and generate more heat that must be dissipated. Professional sizing ensures your system matches your actual needs without overtaxing your boat’s electrical system.
Marine refrigeration systems require professional service annually, with basic maintenance checks every few months during boating season. Salt air, vibration, and temperature cycling create more demanding conditions than residential refrigeration equipment faces.
Annual service includes cleaning condenser coils, checking refrigerant levels, testing electrical connections, and inspecting seals and gaskets. Condenser coils may need cleaning more frequently in dusty or salt-heavy environments to maintain efficiency.
Monthly checks should include cleaning the interior, checking door seals, and ensuring adequate ventilation around the unit. Watch for unusual noises, temperature fluctuations, or increased power consumption that indicate developing problems requiring professional attention.
We service all major marine refrigeration brands including Vitrifrigo, Isotherm, U-Line, Norcold, Dometic, Frigoboat, and Seafrost systems. Our technicians carry diagnostic equipment and common parts for most manufacturers.
Older or discontinued models sometimes require special-order parts, but we maintain relationships with suppliers who stock hard-to-find components. In cases where original parts aren’t available, we can often retrofit compatible components or recommend system upgrades.
Our 40 years of experience means we’ve worked on virtually every type of marine refrigeration system installed in this area. Even with unfamiliar equipment, our diagnostic skills and industry knowledge usually identify problems and solutions quickly.
Dirty condenser coils cause the majority of marine refrigeration problems, reducing efficiency and causing compressors to overheat. Salt air and marine environments accelerate coil contamination, requiring more frequent cleaning than land-based systems.
Electrical connection problems rank second, often caused by vibration, corrosion, or inadequate wiring installation. Marine electrical systems face constant movement and moisture exposure that can loosen connections or cause voltage drops affecting system performance.
Refrigerant leaks develop from vibration stress on tubing connections or corrosion of components exposed to salt air. Poor ventilation around equipment causes overheating and premature component failure. Regular professional maintenance prevents most of these common failure modes.
We provide 24/7 emergency marine refrigeration service throughout the Shoreham area and Long Island. Someone knowledgeable answers the phone around the clock and can dispatch experienced technicians who carry common parts and diagnostic equipment.
Emergency service prioritizes system failures that threaten food safety or prevent boat operation. We understand that refrigeration problems don’t wait for convenient business hours, especially during peak boating season when every day on the water matters.
Response time depends on location and current service demand, but we typically reach emergency calls within a few hours. Our service vehicles stock parts for common repairs, allowing many problems to be resolved on the first visit without waiting for special orders.
Local Resources
Useful Links
