Hear from Our Customers
Your system either works when you need it, or it doesn’t. There’s no middle ground when it’s 15 degrees outside or 90 in the shade.
What matters is whether your furnace fires up on the coldest January morning. Whether your AC keeps up during a July heatwave. Whether you’re spending $300 a month on utilities or half that because your equipment actually runs efficiently.
Most homeowners don’t think about their HVAC system until something goes wrong. Then it’s an emergency call, a hefty repair bill, and a few uncomfortable nights waiting for parts. The smarter play is catching problems before they escalate—worn belts, refrigerant leaks, airflow restrictions that make your system work twice as hard for half the result.
Proper maintenance cuts your energy costs by up to 20%. It extends equipment life by years. And it means you’re not scrambling to find a contractor at 11 PM when your heat goes out.
We’ve been handling commercial refrigeration and marine HVAC across Long Island since 1984. That’s airports, restaurants, catering halls, yacht clubs—places where system failure costs real money immediately.
Now we’re bringing that same level of technical expertise to residential heating and cooling in Salisbury and throughout Nassau County. Same EPA-certified technicians. Same 24/7 availability. Same commitment to fixing it right the first time.
Long Island’s climate is tough on HVAC equipment. Salt air corrodes components faster. Humidity swings stress compressors. Winter cold tests every seal and connection. We’ve been navigating these exact conditions for over 40 years, so we know what fails, when it fails, and how to prevent it.
First, you talk to an actual person—not a voicemail system. We ask what’s happening with your system, when it started, and whether it’s an emergency or something that can wait for a scheduled appointment.
If it’s urgent, we dispatch a technician immediately. Most emergency calls in Salisbury get a same-day response, and we arrive in under two hours for genuine emergencies. If it’s routine maintenance or a non-urgent repair, we schedule a time that works for you.
When our technician arrives, they diagnose the issue and explain what’s wrong in plain language. No jargon. No upselling. Just a clear explanation of the problem and what it takes to fix it. You get upfront pricing before any work starts—no surprise fees when the job’s done.
For installations, we assess your home’s square footage, insulation, window placement, and existing ductwork. Then we size the equipment correctly for your specific setup. Oversized systems cycle on and off too frequently. Undersized systems run constantly and never quite catch up. We match the equipment to the load.
After the work is complete, we test everything, walk you through the system, and answer any questions. Then we follow up to make sure it’s still running the way it should.
Ready to get started?
We handle furnace installation, air conditioning repair, heat pump replacement, and full system maintenance for homes throughout Salisbury and Nassau County. That includes everything from diagnosing why one room stays cold while the rest of the house heats up, to replacing a 20-year-old system that’s finally given out.
Heating system maintenance means inspecting burners, testing ignition systems, checking gas pressure, cleaning flame sensors, and verifying your system’s running at peak efficiency before winter hits. Air conditioning repair covers refrigerant leaks, compressor failures, frozen coils, and airflow problems that leave your home muggy even when the system’s running.
Indoor air quality is a bigger concern than most people realize. Your ductwork accumulates dust, pollen, mold spores, and other contaminants over time. We assess your filtration setup, check for duct leaks, and recommend solutions that actually improve the air you’re breathing daily—not just expensive add-ons that sound good but don’t deliver.
Long Island homeowners are dealing with equipment costs that have nearly doubled since 2019. A system that used to run $6,000 to $8,000 now costs $12,000 to $15,000 or more. That’s why we focus on extending the life of what you already have when it makes sense, and only recommend replacement when repair costs don’t justify keeping an old system limping along.
Full system replacement in Salisbury typically runs between $12,000 and $18,000 depending on your home’s size, the equipment brand, and whether your ductwork needs modification. That’s for a complete furnace and air conditioning setup with proper installation.
Higher-efficiency systems cost more upfront but cut your monthly utility bills significantly. A 16 SEER AC uses about 30% less energy than a 13 SEER model. Over 15 years, that difference adds up to thousands in savings—enough to offset the higher equipment cost.
We provide free estimates with transparent pricing before you commit to anything. No pressure, no surprise fees. Just a clear breakdown of what the job costs and what you’re getting for that investment.
Your furnace should be serviced every fall before heating season starts. Your air conditioner should be serviced every spring before cooling season kicks in. That’s the baseline for keeping equipment running efficiently and catching problems early.
Regular maintenance reduces energy costs by up to 20% and extends your system’s lifespan by years. Most equipment failures happen because small issues—dirty filters, worn belts, low refrigerant—go unnoticed until they cause a bigger breakdown.
About half of homeowners who schedule HVAC service end up needing multiple visits per year. That’s not because systems are unreliable—it’s because homes with older equipment or higher usage naturally need more attention. A maintenance plan keeps you ahead of problems instead of reacting to emergencies.
Uneven heating usually comes down to airflow restrictions, duct leaks, or an undersized system that can’t keep up with your home’s actual heating load. Sometimes it’s as simple as a closed damper or blocked vent. Other times it’s a duct that’s disconnected in your attic or crawl space.
We start by checking airflow at each register, inspecting your ductwork for leaks or damage, and verifying that your system’s sized correctly for your square footage. If your furnace is too small, it’ll heat the rooms closest to the unit but struggle to push warm air to the farthest spaces.
Another common issue is poor insulation. If one room has more exterior walls or older windows, it loses heat faster than the rest of the house. Fixing the HVAC system won’t solve that—you need to address the insulation or window efficiency to see real improvement.
If your system is under 10 years old and the repair costs less than half the price of replacement, fixing it usually makes sense. If it’s over 15 years old and needs a major component like a compressor or heat exchanger, replacement is often the smarter financial move.
Older systems run less efficiently, so even if you fix them, you’re still paying more each month in utility costs. A 20-year-old furnace might only be 60% efficient, meaning 40% of your heating cost goes straight out the exhaust. A modern high-efficiency furnace runs at 95% or higher.
We’ll walk you through the math. Sometimes repair is the right call. Sometimes it’s throwing money at a system that’ll need another expensive fix in six months. We’re not here to sell you a new system if your current one has good years left—but we’re also not going to tell you to keep repairing something that’s costing you more in the long run.
Yes. We’re available 24/7 for genuine emergencies—no heat in winter, no AC during a heatwave, gas leaks, or anything that makes your home unsafe or unlivable. You call, you talk to a real person, and we dispatch a technician immediately.
Most emergency calls in Salisbury get same-day service. We arrive in under two hours for urgent situations, and about 70% of emergency repairs get completed the same day without waiting for parts to be ordered.
Emergency service costs more than scheduled appointments because we’re pulling a technician off another job or calling someone in after hours. But when your heat goes out at 10 PM in January, you’re not worried about saving $100—you need it fixed now. That’s what we’re here for.
Start with your HVAC filter. Most homes use cheap fiberglass filters that barely catch anything. Upgrading to a MERV 11 or MERV 13 pleated filter traps smaller particles—dust, pollen, mold spores—without restricting airflow. Change it every 60 to 90 days.
If you have allergies or respiratory issues, consider a whole-home air purifier integrated into your ductwork. These systems use UV light or advanced filtration to remove contaminants that standard filters miss. They’re not cheap, but they work.
Duct cleaning helps if your ducts are visibly dirty or you’ve had recent construction work that kicked up dust. But it’s not a magic fix—if your ducts are clean and you’re still dealing with poor air quality, the issue is likely your filtration setup or an underlying moisture problem that’s promoting mold growth. We assess the whole system and recommend what’ll actually make a difference.
Local Resources
Useful Links
